|
Motorola Canopy Point to Multipoint 2.4 Ghz Series - Product Specifications 2450SMBC Canopy 2.4 Ghz Subscriber Module Advantage |
|
2450SMBC Canopy 2.4 Ghz Subscriber Module Advantage Canopy Advantage SM offers highest Capacity and lowest Latency. The SM is the subscriber termination unit or the Customer Premise Equipment (CPE). It consists of a single module that operates with an integrated 60-degree antenna. Each SM can communicate to a single AP Module at any given time. SM synchronization and control is accomplished via the received AP signal. SMs are typically located outdoor and Line of Sight (LOS) from the APs. Once the SM is initialized, it scans the Radio Frequency (RF) channels and automatically registers with the appropriate AP
|
![]() |
|
| Canopy Part Number |
|
| Description |
|
| Market Availability |
|
| Signaling Rate |
|
| Typical LOS Range |
|
| Typical Aggregate Useful Throughput |
|
| Frequency range of band |
|
| Non-overlapping Channels |
|
| Channel Width |
|
| Modulation Type |
|
| Channel Spacing |
|
| Encryption |
|
| Latency |
|
| Carrier to Interference ratio (C/I) |
|
| Nominal Receiver Sensitivity (dbm typical) |
|
| Antenna Gain (dB) |
|
| EIRP (dB) |
|
| Equivalent Isotropic Radiated Power (EIRP) |
|
| DC Power (typical) |
|
| Antenna Beam Width |
|
| Mean Time Between Failure (MTBF) |
|
| Temperature |
|
| Wind Survival |
|
| Dimensions |
|
| Weight |
|
| Access Method |
|
| Interface |
|
| Protocols Used |
|
| Network Management |
|
| FCC ID |
|
| Industry Canada Certification Number |
|
Specifications subject to change without notice