Canopy® Wireless Solutions

One stop source for Wireless Solutions using Motorola™ Canopy® Wireless Transmission Products Apycom Java Applets

Motorola Canopy Point to Multipoint 5.2 Ghz Series - Product Specifications

5201SMBC Canopy 5.2 Ghz Subscriber Module Classic With AES

5201SMBC Canopy 5.2 Ghz Subscriber Module Classic With AES

The SM is the subscriber termination unit or the Customer Premise Equipment (CPE). It consists of a single module that operates with an integrated 60-degree antenna. Each SM can communicate to a single AP Module at any given time. SM synchronization and control is accomplished via the received AP signal. SMs are typically located outdoor and Line of Sight (LOS) from the APs. Once the SM is initialized, it scans the Radio Frequency (RF) channels and automatically registers with the appropriate AP

Canopy Part Number

  • 5201SMBC

Description

  • Canopy 5.2 Ghz Subscriber Module Classic With AES

Market Availability

  • North America

Signaling Rate

  • 10 Mbps, 20 Mbps with Advantage AP

Typical LOS Range

  • 2 mi (3.2 km)

Typical Aggregate Useful Throughput

  • 7 Mbps

Frequency range of band

  • U-NII 5250-5350 MHz

Non-overlapping Channels

  • 3

Channel Width

  • 20 MHz

Modulation Type

  • High Index 2-level and 4-level Frequency Shift Keying (FSK) optimized for interference rejection

Channel Spacing

  • configurable on 5 MHz increments

Encryption

  • FIPS 197 certified AES capable

Latency

  • 6 msec with Advantage AP, 15 msec with Canopy AP

Carrier to Interference ratio (C/I)

  • ~3dB @ 10 Mbps, ~10dB @ 20 Mbps at -65dBm

Nominal Receiver Sensitivity (dbm typical)

  • -86 dBm

Antenna Gain (dB)

  • 7 dBi

EIRP (dB)

  • 30 dBm

Equivalent Isotropic Radiated Power (EIRP)

  • 1 W

DC Power (typical)

  • 0.3 A @ 24 VDC = 7.2 W

Antenna Beam Width

  • 3 dB antenna beam width 60 degrees, Azimuth and Elevation

Mean Time Between Failure (MTBF)

  • 40 yr

Temperature

  • -40° C to +55° C (-40° F to +131° F)

Wind Survival

  • 190 km/hr (118 miles/hr)

Dimensions

  • 11.75 in H x 3.4 in W x 3.4 in D (29.9 cm H x 8.6 cm W x 8.6 cm D)

Weight

  • .45 kg (1 lb)

Access Method

  • Time Division Duplexing/Time Division Multiple Access (TDD/TDMA)

Interface

  • 10/100 Base T, half/full duplex. Rate auto negotiated (802.3 compliant)

Protocols Used

  • IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP

Network Management

  • HTTP, TELNET, FTP, SNMP Version 2c

FCC ID

  • ABZ89FC3789

Industry Canada Certification Number

  • 109W-5200

NYCE

  • 0202CE08128

FIPS

  • AES product is FIPS 197 certified

 

Specifications subject to change without notice

Home | About | Products | Services | Solutions | Resources | Ordering | Contact | Site Map | www.Canopy-Wireless-Solutions.com

Copyright © 2005 - 2009 - One stop source for Complete Motorola™Canopy  Wireless Transmission Solutions