Canopy PTP400 Series - Product Specifications

5.7 Ghz 21 Mbps Single End Link Integrated Antenna

BP5730BH20-1CC Canopy 5.7 GHZ, 30 Mbps OTA, Spare Backhaul, Integrated

Integrated Line of Sight (LOS), Near and Non Line of Sight point-to-point, medium-capacity, backhaul link with adaptive equalization, Package includes, Radio ODU, Radio IDU/Power Supply, Set of mounting hardware

• UV Rated Cat 5 PoE cable sold separately

• Surge Suppressor sold separately

• Software Upgradeable to 43 Mbps Aggregate/60 Mbps OTA

• View PDF

• Shopping Cart

Canopy Part Number

• BP5730BH20-1CC

RF bands

• 5.725 GHz–5.850 GHz*

Channel size

• 5.8 and 5.4 GHz: 12 MHz

• By Intelligent Dynamic Frequency Selection (i-DFS) or manual intervention; automatic detection on start-up and continual adaptation to avoid interference

Transmit power control

• Adaptive, varying between 25 dBm and -10 dBm according to modulation selected and radio path**

System gain

• 5.8 and 5.4 GHz Integrated: Varies with modulation mode; up to 168 dB with 23.5 dBi integrated antenna**  Connectorized: Varies with modulation mode and antenna type**

Receiver sensitivity

• Adaptive, varying between -96.0 dBm and -72 dBm according to modulation selected

Modulation

• Dynamic; 8 modes adapting between BPSK and 64 QAM

Error correction

• FEC, ARQ

Duplex scheme

• TDD ratio 50:50, 66:33; same or split frequency Tx/Rx

Antenna: type/gain/B/W

• Integrated: Integrated flat plate 23 dBi / 7°

• Connectorized: Approved to operate with flat plate up to 28 dBi or parabolic dish up to 37.7 dBi; connected via 2 x N-type female

Range

• Up to 124 miles (200 km)***

Data rates Lite

• 5.8 and 5.4 GHz Lite: Up to 21 Mbps at the Ethernet; dynamically variable with modulation range from 1.5 Mbps to 21 Mbps (aggregate)

Security and encryption

• Proprietary scrambling mechanism; optional AES 128 Bit Encryption

*** In all cases the range limit is set by the latest software release

Protocol

• IEEE 802.3

Packet prioritization

• IEEE 802.1p

Interface

• 10 BASE-T / 100 BASE-T (RJ-45)–auto MDI/MDIX switching

Latency

• Throughput Mode: Less than 7 mSec (default)

• Latency Mode: Less than 6 mSec

LED indicators

• Power status, Ethernet link status and activity

System management

• Web Server and SNMP

Installation

• Built-in audio assistance for link optimization

Connection

• Distance between outdoor unit and primary network connection: up to 330’ (100 meters)

Dimensions

• Integrated outdoor unit (ODU): Width 14.5" (370 mm), Height 14.5" (370 mm), Depth 3.75" (95 mm)

• Connectorized ODU: Width 12" (305 mm), Height 12" (305 mm), Depth 4.1" (105 mm)

• Powered indoor unit (PIDU Plus): Width 9.75" (250 mm), Height 1.5" (40 mm), Depth 3" (80 mm)

Weight

• Integrated ODU: 12.1 lbs (5.5 kg) including bracket

• Connectorized ODU: 9.1 lbs (4.3 kg) including bracket

• PIDU Plus: 1.9 lbs (864 g)

Wind speed

• 150 mph (242 kph)

Power supply

• Integrated with Indoor Unit

• 90–240 VAC, 50–60 Hz / 36-60V DC

• 55 W max

Operating temperature

• -40°F (-40°C) to +140°F (+60°C), including solar radiation

Protection and safety

• IP65/ UL60950; IEC60950; EN60950; CSA-C22.2 No. 60950

Regulatory

• 5.8 GHz: FCC Part 15, sub-part C 15.247, Eire ComReg 03/42, UK Approval to IR2007

EMC

• USA–FCC Part 15, Class B; Europe–EN 301 489-4